-
Food bag filling and sealing machine is a kind of equipment used for food packaging, the main function is to fill the food into the bag and seal the bag operation. The following is the detailed introduction about the food bag filling and sealing machine:
- Components:
- Conveying system: it is responsible for conveying the food to be packed from the silo to the filling mechanism to ensure that the food can enter the filling process accurately and stably. Common conveying methods include belt conveying, chain conveying and so on.
- Filling system: this is the core part of the food bag filling machine, which quantitatively fills the food into the bag according to the set capacity. For foodstuffs in different states (e.g. liquid, powder, granule, etc.), the structure and working principle of the filling system will be different. For example, the filling of liquid food may use pump filling, pumping the liquid to the bag through the pump; powder food filling may use screw propeller and other devices for quantitative delivery.
- Sealing system: sealing operation is carried out on the bag filled with food to ensure the sealing and safety of the food. There are two main sealing methods: heat sealing and cold sealing. Heat sealing is to melt the plastic of the sealing part of the bag by heating, and then bonded together under pressure; cold sealing is to use adhesive or mechanical pressure to seal.
- Control system: Control the operation of the whole equipment, including the setting and adjustment of parameters such as conveying speed, filling volume, sealing temperature and time. The control system can adopt PLC (Programmable Logic Controller), touch screen and other advanced control technologies to ensure the stable operation and precise operation of the equipment.
- Electrical system: Provide power support and signal transmission for the equipment to ensure that each component can work normally. The quality and stability of the electrical system directly affects the operational reliability and safety of the equipment.
- Workflow:
- Firstly, the food bag is installed at the designated position of the filling and sealing machine and the bag opening is opened for the filling operation.
- Then, the conveying system transports the foodstuff under the filling system, which fills the foodstuff into the bag according to the set capacity.
- After the filling is completed, the conveying system conveys the bag with the foodstuff to the sealing system, and the sealing system performs the sealing operation on the mouth of the bag.
- Finally, the sealed food bag is output through the conveying system to complete the whole packaging process.
- Application scope: Food bag filling and sealing machine is widely used in the packaging of various foodstuffs, such as snacks, beverages, condiments, dairy products, grains and so on. Different types of food need to choose different types and parameters of the potting machine to meet the packaging requirements.
- Advantages:
- Improve production efficiency: food bag filling and sealing machine can realize automatic filling and sealing operation, which greatly improves the speed and efficiency of packaging and reduces the workload and labor intensity of manual operation.
- Ensure the quality of packaging: through precise filling volume control and reliable sealing technology, it can ensure the quality of food packaging and reduce food leakage, spoilage and other problems.
- Hygiene and safety: the equipment adopts materials and structural design in line with food hygiene standards, which can ensure the hygiene and safety of food in the packaging process and avoid contamination of food.
- Maintenance: In order to ensure the normal operation and service life of the food bag filling and sealing machine, it is necessary to regularly maintain the equipment. Mainly includes cleaning the surface of the equipment and internal dust, dirt, check the wear and tear of various components and timely replacement, regular lubrication of the equipment.
|
Model
|
RT-260GS
|
|
Pouch Size
|
90*140mm(min);240*320mm(max)
|
|
Filling Capacity
|
1800ml
|
|
Packing Capacity
|
30-60ppm
|
|
Power
|
9.5KW
|
| Voltage |
AC380V,50Hz |
|
Dimension(L*W*H)
|
3800mm*1200mm*1550mm |
| Equipment weight |
5500kg
|
|
Function
|
automatic roll fillm horizontal filling sealing packaging machine
|
Machine Configuration
1. SIEMENS or INOVANCE full servo motor motion control system.
2. Remote module
3. 304 stainless steel frame.
4. Individual film release racks.
5. Ultraviolet light sterilization system.
6. Self-supporting bag with three or four side sealing.
7. German self-lubricating bearings
8. Standard Scissor Module (optional die-cutting unit).
9. 12" Siemens mobile touch screen part laser marking.
10. Self-lubricating system with spare parts maintenance reminder.
11. Remote service function.
12. Safety door system
13. Chassis built-in LED lights
14. Bag exhaust
15. water cooling system
16. Nitrogen flushing device
Nitrogen metering station
17. Double heat sealing system
Double cooling system
Installation Instructions
Installation and commissioning
A) After the equipment arrives at the buyer's workshop, the buyer unpacks, installs, commissioning and trial production of the equipment in the buyer's own packing machine. During the installation and commissioning period, the supplier is responsible for providing the corresponding spare parts.
B) Training
The supplier is responsible for technical training. The training includes equipment structure and maintenance, equipment control and operation. The training shall take place on the production line or in the supplier's factory. The supplier will assign qualified technicians to guide and prepare the training program,
1. technologically leading bag manufacturer in the market.
2. Excellent reputation for extremely stable performance.
3. Comprehensive pouch filling technology
4. Strict production management and project management
5. 7/24 remote service support.
6. Management using SAP, ERP and CRM systems.
7. Local spare parts storage.
Our service
1. We have specialized customer service staff to call back from time to time, and ensure offline after-sales engineers to visit our customers 1-2 times a year.
We provide online remote service for customers at any time in 24 hours, and we have 7 experienced electromechanical engineers offline.
Any equipment we sell has a 5-year parts inventory. We guarantee that every part of every piece of equipment is individually coded. We guarantee that each customer has a personal database of all equipment sold that is traceable.
Technical documentation
The technical documentation to be provided upon delivery includes
Packing list
Equipment manual
Operation/maintenance manuals
Electrical schematics
| Q:Are you a manufacturer or a trading company? |
| A:We are manufacturer. Our factory is located in Shanghai, welcome to visit. |
| Q:What kind of bags can your packing machine pack? |
| A:Our packaging machines can pack doypacks and sacks. Optional features include zippers, nozzles, and shaped bags. |
| Q:What kind of products can your packaging machine package? |
| A:Our packaging machines can package different types of products such as powders, granules and liquids. Pharmaceuticals, food, chemicals, dairy products |
| Q:What is the packing capacity (speed) of your machines? |
| A:We have single outlet (40-70 ppm), double outlet (70-120 ppm), and four outlet (120-140 ppm). |
| Q:How long is the delivery time? |
| A:This depends on the model you order. Standard machines are usually 30-60 days. Customized machines take longer. |
){kind=link}